Description

KEY FEATURES
Navrang 24V to 12V Isolated DC Converter :

The DC-DC Converter provides clean 12VDC power suitable for instrumentation and control networks or process equipment. For operation under the most harsh and demanding conditions, the unit is fully sealed and enclosed to protect against moisture, shock and vibration. Power from a battery or other source in the range of 12-24V DC is converted to a 12VDC output regulated to 1% and 20 Amps continuous current. Input and output isolation is provided. The unit is designed with extremely rugged surge and transient suppression in addition to sustained over/under voltage protection. With a nameplate rating of 240Watts of output power, the DC-DC Converter has an efficiency rated at 82%.

Step down 24V DC battery voltage and provide clean, isolated 12VDC power in a rugged package…

• 24V DC to 12V DC Converter
• Input operating voltage range from 12 to 24VDC
• Conditioned output of 12VDC ± 1%, 20A, 240 Watts
• No minimum load requirement
• Switch mode operation delivers high efficiency
• Reverse polarity protection
• Input and output isolation
• Robust, rugged and highly reliable
• Compact size for ease of mounting in confined spaces
• Water Resistant, Overload and Short Circuit protection
• Suitable for moist, high shock and vibration environments
• Operational from -40°C to 70°C temperature
• IP65 protection

Recommended use:
SCADA Systems, Remote Terminal Units (RTU), Switchgear, Motor Control Centers, Telecommunications Equipment,
Charging/Cranking Battery Based Power Supply Systems, Power Conditioning for Controls & Instrumentation utilizing,
DeviceNet or other industrial networks, Off-Highway Equipment Control Systems,
Marine Auxiliary and Propulsion Systems

These applications are found in a variety of industries including process industries, general manufacturing, electric utilities, oil & gas, water/waste water and mobile equipment.

Part Number:
DSC-20-24-12-0915

PHYSICAL CONSTANTS:

Input Voltage: 12V-24V DC
Output Voltage: 12V DC
Output Current: 20 Amp (Max)
Output Power: 240W (Max)
Body Material: Aluminium
Operating Temperature: -40℃ to 70℃
Storage Temperature: Normal Temperature
Protection Rating: IP65
Warranty: 1 years

APPLICATION DETAILS:

Safety: Before starting use of the converter, please check if the converter was damaged during transportation, if any damage shown, please do not install or use it. Any maintenance should be performed by trained professionals only.

Installation: 

1. A UL listed maximum 30A fuse is recommended in the primary circuit to provide protection for the primary wiring.
2. Use two ¼-20 1-inch screws to mount the converter.
3. Ground the unit to chassis ground by attaching a ground strap to the ground stud and locking washer found on the housing.
4. Snap the plug connector into the mating receptacle mounted on the converter.
5. Connect the wiring to power and output terminal blocks (provided by customer).
6. Once the load is ready to receive power, turn on the power source to the converter.

Notes: Non-professional is not allowed to disassemble and maintain the products. We have the right not to provide after-sale service if unauthorized dis-assembly and maintenance happens to the products.

REMARKS: Specifications are indicative and subject to change. Actual performance will vary depending on the application and operating conditions. Users should satisfy themselves that the product is suitable for use in the intended application. All our products carry a limited warranty against defects in material and workmanship.