HEMPEL’S THINNER 08230

HEMPEL’S THINNER 08230:

HEMPEL PAINT is produced and supplied in such a way that thinning is normally not necessary provided the paint is properly mixed/stirred. However, if the paint is to be applied in a low film thickness (for instance as a “sealer coat”) or if the paint has become too thick, e.g. in cold weather, the HEMPEL THINNER(s) indicated on the product data sheet may be added to obtain a consistency most suitable for application. As a general rule, thinning should be kept at a minimum as the quality of the paint work will suffer from too liberal thinning. However, if application is to take place at high temperatures (air and/or steel), thinning may even beyond the limits mentioned on the data sheets exceptionally be necessary in order to avoid dry-spray and poor film formation. HEMPEL’S THINNERS are blended to give the best results with regard to brush ability, spray properties, etc. In some cases ordinary solvents may substitute.

SKU: NHTH0823000000 Category:

Description

KEY FEATURES
HEMPEL’S THINNER 08230:

HEMPEL PAINT is produced and supplied in such a way that thinning is normally not necessary provided the paint is properly mixed/stirred. However, if the paint is to be applied in a low film thickness (for instance as a “sealer coat”) or if the paint has become too thick, e.g. in cold weather, the HEMPEL THINNER(s) indicated on the product data sheet may be added to obtain a consistency most suitable for application. As a general rule, thinning should be kept at a minimum as the quality of the paint work will suffer from too liberal thinning. However, if application is to take place at high temperatures (air and/or steel), thinning may even beyond the limits mentioned on the data sheets exceptionally be necessary in order to avoid dry-spray and poor film formation. HEMPEL’S THINNERS are blended to give the best results with regard to brush ability, spray properties, etc. In some cases ordinary solvents may substitute.

Recommended use:

08230 (32°C/90°F)
Thinner for HEMPALIN qualities and other alkyd-based products (except HEMPAQUICK qualities) .

Availability:

Part of Group Assortment. Local availability subject to confirmation.

PHYSICAL CONSTANTS:

Shade nos/Colours: 00000/ Colourless.
Flash point:  38 °C [100.4 °F]
Specific gravity: 0.8 kg/litre [6.5 lbs/US gallon]
VOC content: 781 g/l [6.5 lbs/US gallon]

The physical constants stated are nominal data according to the HEMPEL Group’s approved formulas.

APPLICATION DETAILS:

Safety: Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Safety Data Sheets and follow all local or national safety regulations.
REMARKS: THINNER 08230 has a stronger thinning effect than white spirit or turpentine. Tools can usually be cleaned with the THINNER prescribed for the product.
Note: HEMPEL’S THINNER 08230 For professional use only.

PRODUCT DATA SHEET

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.